How to Fix a Lazy Boy Power Recliner Footrest in 8 Simple Steps
You’re relaxing in your Lazy Boy power recliner, and suddenly, the footrest stops working. As long as you can disconnect the motor from the wall outlet, troubleshooting and repairing this problem is relatively simple. So how do I fix a Lazy Boy power recliner footrest?
In this guide, we’ll outline the repair process for a Lazy Boy power recliner footrest. We’ll look at the tools and materials you’ll need, as well as step-by-step instructions on disassembling the footrest. Let’s get started!
How does the Power Recliner work?
Before diving into the repair process, it’s important to understand how a power recliner works.
A power recliner typically has three main components: the motor, the drive system, and the footrest. The motor generates electrical energy that powers the drive system, which is connected to a gearbox and springs. This drive system controls the footrest and allows it to move up and down.
When you press a switch or button on the power recliner, an electrical signal is sent from the switch to the motor, which activates the drive system. In turn, this powers the springs and gears in the seat back that control how far and how fast your footrest moves.
The drive system also has a safety feature, which prevents the recliner from tilting back too far and injuring you or damaging the chair. This feature, known as an “end-of-travel” sensor, stops the recliner at a certain angle so you don’t end up tumbling backward.
Why You Might Need to Fix the Footrest?
There are several reasons why you might need to fix a Lazy Boy power recliner footrest. The most common problems are related to the motor, drive system, or end-of-travel sensor.
The motor can wear out over time, which will cause the footrest to quit working. The drive system might malfunction due to a broken gear or spring, preventing your footrest from moving properly. And if there’s an issue with the end-of-travel sensor, you may experience a sudden jerking motion when your footrest reaches its maximum angle.
In any case, fixing the footrest of your Lazy Boy power recliner is fairly straightforward and can be completed in an hour or two.
Checkout: Most Comfortable Recliners
How to Fix a Lazy Boy Power Recliner Footrest?
Now that we’ve discussed how a power recliner works and why you might need to fix the footrest, let’s look at how to repair your Lazy Boy chair.
Tools and materials needed
Here are the tools you should have on hand for disassembly and repairs:
- Philips head screwdriver
- Flathead screwdriver
- Needle-nose pliers
- Socket wrench set
You’ll also need specific materials, depending on the type of repair needed. For example, if replacing a part, you’ll need to purchase a new one from the manufacturer. If you’re troubleshooting an electrical issue, you’ll want various tools for testing and measuring.
Having all the necessary parts on hand will make the repair process much smoother, so take time to verify that you have everything ready before beginning.
Checkout: Best Recliners For Back Pain
Step-by-step instructions on how to disassemble the footrest
Here are the basic steps for disassembling your Lazy Boy power recliner footrest:
- Start by unplugging the power cord from the wall. You don’t want to risk an electric shock while working on it.
- Unscrew the screws that hold the backrest in place and remove them from the footrest frame.
- Carefully disconnect any electrical wiring between the backrest and the footrest.
- Unscrew the screws that hold the lift motor in place, then disconnect any wiring from it.
- Remove the four bolts that secure the footrest to the frame at the base of your chair.
- Pull the footrest from its mountings on either side of the chair frame.
- Now you can remove the footrest cover, starting at one corner and working your way around. If necessary, use a flathead screwdriver to pry open any stubborn snaps or Velcro strips that hold it in place.
- Finally, you can unscrew the two bolts holding together the frame of the footrest.
And there you have it – your Lazy Boy power recliner footrest is now disassembled and ready to be cleaned or repaired.
Checkout: Best Leather Recliners
How to replace parts, if necessary?
If a part of your footrest needs to be replaced, you’ll first need to determine the exact model and size of the old part. Consult the owner’s manual for additional instructions specific to your recliner.
Once you’ve identified the correct part, it’s time to install it. Connect any necessary wires, then reattach the lift motor and footrest frame. Be sure to tighten all the bolts securely, but not too tightly – you don’t want to damage the parts or put stress on the frame of your chair.
Read Also: Best Recliners for Seniors
How to reassemble and test the recliner after repair?
Now that you’ve replaced any necessary parts, it’s time to reassemble the footrest.
Start by replacing the cover, then reconnect the backrest to the frame. Reattach the four bolts at the base of your chair and make sure all screws are tightened securely.
Once you’ve reassembled everything, plug in your recliner and give it a test drive. If everything is working properly, you can enjoy using your Lazy Boy power recliner and a new one.
Frequently Asked Questions
To adjust the tension of your footrest, check for a dial or switch near the base of the chair. If you can’t find one, consult your Lazy Boy recliner’s user manual for instructions. Once you’ve found it, all you need to do is turn it to increase or decrease the tension to get the desired level of support.
Your Lazy Boy recliner’s footrest won’t close, it’s likely because the tension is high. To fix this issue, you’ll need to reduce the tension. As mentioned above, look for a dial or switch near the base of the chair and turn it down until the footrest can close all the way.
The foot part of a recliner is known as the footrest. It’s usually adjustable, allowing you to extend it and put your feet up while lounging in the chair.
Yes, most power recliners are equipped with a manual override feature. This allows you to use the footrest and back of the chair manually in case there’s an issue with the power mechanism. To access this feature, look for a lever or switch near the base of your recliner.
Conclusion
To fix a Lazy Boy Power Recliner Footrest, open up the motor at the base of the footrest and check for damage or blockages. If there is any damage, it should be replaced before putting everything back together. You can reset the power recliner by unplugging it from its power source and then plugging it back in.
With these simple steps, you can easily fix a Lazy Boy Power Recliner Footrest and have your favorite furniture piece back in perfect working order. So the next time your footrest isn’t functioning right, remember to use this guide and fix it quickly.
